Regulator |
Features :
Filter :
Regulator : |
Modular type Suitable for panel mounting
PP/Bronze filtering element. Separator and shield for efficient moisture separation Press type manual drain for easy operation Steel bowl guard,bayonet type Better flow and regulating characteristics.
Diaphragm operated, relieving type. Pressure compensated by Balanced poppet Flow compensated for faster response. Non raising 'Press to lock' adjusting knob
for locking at any set pressure |
| |
|
Air Lubricator |
|
Air Lubricator
|
Features : • Conforms to ISO 6301-1
• Suitable for Modular Mounting
• Fog / Mist type, Fine adjustment of Lubrication.
• Steel bowl guard bayonet type.
• Lubrication proportional to flow
Technical Specification
Model
|
LUB 2016 |
Medium |
Compressed air - Filtered |
Port size |
1/2" BSP (F) |
Flow rate @ Ltrs /min. |
3000 |
Max. Supply pressure |
10 bar |
Ambient / Medium temperature |
5° to 60° r. |
Bowl capacity |
150 ml. |
Bowl material |
Polycarbonate |
Installation |
*teti«A (,as m the pWute) |
Weight |
0.50 Kg |
Recommended Oil |
ISO VG 32 (Servo System 32) |
|
Principle of Operation :
A part of the air entering the lubricator through "IN" pressurize the bowl chamber. Flow of full air
goes through "OUT" deflecting the "Deflector" and creating pressure drop below the sight dome.
The pressure in the Bowl presses the oil through the suction tube and the oil flows through the sight dome.
All the oil drops seen through the sight dome mixes with the main - stream air and comes through "OUT".
The required oil drops can be adjusted by the adjusting needle. Oil may be filled when under pressure.
However it is recommended to vent the air completely before filling the oil,
|
Afr Combination + Lubricator & Frl |
|
|
Individual Filter -Regulator combination & Lubricator units are easily removable / mountable without disturbing the pipe line.
Features :
• Modular type for easy and fast maintenance.
• Suitable for wall mounting.
• Size : 1/4", 1/2", 3/4", 1", 1 1/2", 2" BSP (F) |
Technical Specification
Model
|
FRCLM 2016, FRLM 2016 |
Medium |
Compressed air |
Port size |
1/2" BSP (F) |
Pressure gauge port size |
1/8" BSP (F) |
Flow rate @ Ltrs/min |
2800 |
Max. Supply pressure |
10 bar |
Regulating Pressure Range |
0.5-10 ba #(Standard) |
Ambient / Medium temp. |
S- 60 c |
Filteration # |
5 , 25 & 40 microns (Standard) |
Bowl capacity - Filter |
40 ml |
Bowl capacity - Lubricator
(at maximum oil level) |
150 ml |
Recommended oil |
ISOVG 32 ( Servo System 32) |
Bowl material |
Polycarbonate |
Installation |
Vertical (as shown in the picture) |
Weight |
2.25 Kg |
|
Air Regulator |
|
Features : • Conforms to ISO 6953-1
• Suitable for panel and modular mountings
• Non raising 'Press to Lock' adjusting knob for locking at any set pressure
• Diaphragm operated, relieving type
• Pressure compensated by Balanced poppet.
|
Technical Specification
Model
|
AR 2016 |
Medium |
Compressed air-Filtered |
Port size |
1/2" BSP (F) |
Pressure Gauge Port Size |
1/8 11 |
Flow rate @ Ltrs /min |
4000 |
Max. Supply pressure |
15 bar |
Regulating Pressure Range # |
0.5- 10 bar (Standard) |
Ambient / Medium temperature |
5° to 60° c |
Pressure Setting
Pull the knob and adjust by turning the knob clockwise to increase the pressure. Push the knob back to its locked position.( Turning the knob anti-clockwise will reduce the pressure)
Common Precautions for all units;
• Note the direction of flow before installation and connect piping accordingly.
• Rush pipings for dirt, dust, rust and other loose and foreign particles.
• Install in clean atmosphere.
|
Air Filter |
|
Features : • Conforms to ISO 5782-1
• Suitable for Modular mounting
• Steel bowl guard, bayonet type.
• Press type Manual drain for easy operation.
• Bronze filter element / P P
• Separator and shield for efficient moisture separation.
• Size : 1/4", 1/2", 3/4", 1", 1 1/2", 2" BSP (F) |
